How To Access Window Weights
If your old house has double-hung windows, you'll demand to know how to get to the sash cords for maintenance or repair. Window sash cords get frayed or broken or disconnected from the weights that give residual to the window. These mechanisms also demand to exist periodically lubricated and maintained to forbid problems.
Gather your materials: Razor blade or utility pocketknife, potent putty knife, hammer, screwdriver.
No running with knives immune! Do exist conscientious when handling sharp (or pointed) objects.
Score the caulk and pigment around each window end.
Cut between the window stop (the trim along the inside of the window frame) and the frame itself with a razor blade or utility pocketknife.
Remove the stops from both sides of the window.
Start at the lesser and piece of work your mode up, tap the putty knife to pry the stop loose wherever at that place's a smash. Remove the nails later they're loosened from the sash.
Be careful when removing the window stops and trim. Trim pieces can pause easily if you use too much force.
Remove the metal track from the lower side of each window, if necessary.
Some windows have a metal track on each side for the window to slide along. Use the putty knife to gently pry the track free.
Push the lower sash upwardly and elevator it out of the window frame.
Push the lower sash upward high enough to articulate the windowsill and lift information technology out of the window frame by pulling the bottom toward you.
Detach the cord from its slot on each side of the lower sash.
The cords are attached nearly the top of each side of the lower sash.
Remove the parting strip from each side of the window.
Utilize the putty knife to gently pry the parting strip loose from each side of the window frame.
Remove the admission plate from each side of the lower jamb.
Unscrew the access plate (sash-weight pocket cover) and gear up information technology aside. If the jambs don't have access plates, remove the window casing to get at the cords, weights, and pulleys.
Take out the weights from each side of the jamb.
Pull the weights out of the access pocket.
Remove the upper sash.
You'll see the weight pulleys on each side of the upper jamb.
Clean out whatever debris from within the access console.
Now you're ready to accept care of your cords. When you are finished, follow the reverse process to put the window back together.
About This Article
This article tin be found in the category:
- General (Home Improvement & Appliances) ,
Source: https://www.dummies.com/article/home-auto-hobbies/home-improvement-appliances/general-home-improvement-appliances/how-to-access-window-sash-cords-in-double-hung-windows-206804/
Posted by: taylorsuchers93.blogspot.com
0 Response to "How To Access Window Weights"
Post a Comment